EP1C Plus servo drive deep hole drilling industry application
2023-06-01
一、Application introduction
Large and medium-sized abrasives, castings often involve deep holes and through-hole requirements during processing. It is necessary to use deep hole drilling machine, deep hole drilling machine processing has a wide range of applications, high rigidity, high precision, high speed, high efficiency, high reliability, high torque and other characteristics. The use of deep hole drilling machine hole drilling can save process equipment, shorten the production process cycle, ensure the quality of product processing, and improve production efficiency.
Wuhan Meixin EP1C Plus-E3S0M2 equipment supports equipment for drilling in a three-axis deep hole.
二、System scenario
The control system adopts the new generation of 21AT+ 3 sets of EP1C Plus-E3S0M2 servo and supporting motors.
The servo power segment covers 0.1kW~7.5kW
三、Scenario advantages
Stable operation at low rpm without creeping.
Full bus solution, easy maintenance, can provide rich diagnostic information
四、Device description EP1C Plus
1. Voltage: AC 220V/380V, -15%~+10%, 50/60HZ, 380V control voltage is DC24V±15%, not less than 1.5A
2. Power: 0.1kW~7.5kW
3. Control mode: position mode, speed mode, torque mode
4. Control mode: vector control
5. Working humidity 40%~80% (no condensation)
6. Storage -40 °C ~ 50 °C, working 0 °C ~ 40 °C
7. Support 17bit/23bit encoder
8. Communication interface: Modbus, MECHATROLINKk-II
9. Speed response bandwidth 1.2kHZ, high rigidity
10. The notch filter effectively suppresses high-frequency resonance and solves the resonance problem in mechanical high-speed motion
Contact us
CRM system
Online service
Official wechat
