Application of EP3E-EC servo drive on engraving machine
2023-06-01
一、Application introduction
With the continuous development of industrial automation, engraving machines are widely used in woodworking carving, metal engraving and so on.
Application of Wuhan Meixin EP3E-EC equipment on the engraving machine produced by ** CNC Equipment Co., Ltd.
二、Process requirements
1. High processing accuracy and fast response
2. Long-term continuous and stable operation
3. Smooth operation without jitter
三、System scenario
1. The control system adopts Baoyuan EtherCAT controller M5800D3-A2S1V2-M5
2. Servo power 1.5kW
3. The voltage is 380V, eliminating transformers, saving cost and installation space
四、Scenario advantages
1. Full bus scheme, simple wiring
2. The parameters can be connected to the computer to view and modify, monitor the operation status, and maintain conveniently
3. Small size, save space
五、Device description EP3E-EC
1. Voltage: AC 220V/380V
2. Power: 0.1kW~15kW
3. 125μs minimum communication cycle
4. Synchronous jitter time is less than 1μs, DC synchronization (SYNC0)
5. Process data channel: 4RxPDO, 4TxPDO, 32bytes/PDO
6. Service data channel: 1SDO
7. Control cycle: current loop 62.5μs, speed loop 62.5μs, position loop 62.5μs
8. Operation mode: CSP, CSV, CST
Contact us
CRM system
Online service
Official wechat
